29218
  • 29218

HDMI and VGA + Stereo Audio to HDMI HDBaseT over Cat5 Extender Kit (TAA Compliant)

$664.55
C2G
CTG 29218
44 Items
2018-08-08
Qty
In Stock

Complete solution for extending HDMI, VGA and Stereo Audio signals up to 230 feet over a single Cat5 network patch cable using HDBaseT technology

Shipping Rates

The HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat5 Extender Kit is a complete solution for extending audio/video signals from a Blu-ray™ player and a laptop to the HDMI input of a projector. This kit extends HDMI, VGA and Stereo Audio signals over a single Cat5/Cat5e/Cat6 unshielded twisted pair network patch cable up to 230 feet at a 1080p resolution. The rear cable connections for the Cat5 cable and the optional serial cable are set at 90°, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like our TruLink® A/V Controller This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

Note: Stranded Cat5e/6 patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat5e/6 network cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab

HDBaseT